 |
|
|
HUBER Curved Bar Screen CurveMax® |
|
|
Compact curved bar screen for reliable separation of solids from wastewater
- No submerged driving parts
- Low headloss due to the large effective bar rack surface
|
|
|
The CurveMax® Screen is perfectly suited to both municipal and industrial wastewater, and process water screening.
Material removal from the bar rack starts at a tangent to the channel bottom so that any accumulation of disturbing material is eliminated. The optimal approaching flow conditions and large effective bar rack surface ensure a high hydraulic throughput capacity under any operating conditions.
The curved bar rack is cleaned by a rake. Depending on the bar spacing, the bar rack design is either a bar or non-blocking wedge wire profile. At the end of the bar rack cleaning cycle the rake is cleaned by a pivoted comb discharging the removed screenings into a downstream unit. As the cleaning velocity is variable, the screenings discharge capacity is then adjustable. This is particularly beneficiary in case of increased screenings loads, e. g. due to sudden peak loads caused by emptying of upstream stormwater tanks.
The easy to access and maintain drive unit is installed above the channel. The compact frame of the CurveMax® Screen allows for a low installation height above ground level. A mechanical linkage converts the rotating course of movement of the drive motor into a curved track.
|
|
|
|
HUBER - WHERE QUALITY AND SERVICE SPRING TO MIND
Huber Technology UK, Units C and D Brunel Park
Bumpers Farm, Chippenham Wiltshire SN14 6NQ
Phone +44 1249 765000, Fax +44 1249 449076, E-mail: rotamat@huber.co.uk |
|
|
|
