 |
|
|
ROTAMAT® Pumping Station Screen RoK 4 |
|
|
Automatically cleaned fine screen with vertical lifting, dewatering and compaction of screenings
- Prevents clogging and tressing in the pumping station
- Compact unit, easy to fit into confined spaces
- easy retrofitting into existing constructions
- Dewatering and compaction of screenings
- Optional frost-protected unit for outdoor operation
- Sturdy, low-maintenance stainless steel design
|
|
|
The waste water flows down the sewer into the pump well. This pipe duct is extended into the well chamber and is designed with a screening area.
The liquid phase passes through the wedge section screening area into the pump well, from where it is pumped away to a new higher level.
The screenings material removed is transported along the axis of the screen by a horizontal helical screw. This screw is fitted with brushes on the leading edge of the flights, which continuously clean the screening area. The screenings are then picked up by a vertical transporting screw, which lifts the screenings upwards to a discharge point above, whilst taking up very little area and saving space.
The screenings can be discharged into a container for a completely enclosed odour free operation.
If the screen suffers a power failure a piped by pass duct is provided to prevent backing up of the incoming sewer, and waste water is discharged directly into the pump sump.
|
|
|
|
HUBER - WHERE QUALITY AND SERVICE SPRING TO MIND
Huber Technology UK, Units C and D Brunel Park
Bumpers Farm, Chippenham Wiltshire SN14 6NQ
Phone +44 1249 765000, Fax +44 1249 449076, E-mail: rotamat@huber.co.uk |
|
|
|
