 |
|
|
HUBER Multi-Rake Bar Screen RakeMax® |
|
|
Reliable, sturdy travelling rake bar screen:
- Very high screenings discharge capacity
- Low headloss
- Low installation height above floor even in case of deep channels
- Control-independent safety system
|
|
|
The RakeMax® Screen is perfectly suitable to be used for both municipal and industrial wastewater and process water clarification. The cleaning elements attached to the chain system can easily be adjusted to different requirements. These elements can be conventional rakes, or brushes, or plastic wipers. As the cleaning elements are variable, the screenings discharge capacity is adjustable, which is especially favourable for high pollution loads.
The installation height over floor of the RakeMax® is very small and is only influenced, even in case of deep channels, by the installation height of downstream transport or washing units.
Each end of the cleaning elements is connected with a drive chain. Each chain is driven by a sprocket on a common shaft and a flange mounted gear motor. If screen operation is blocked by some object, an overload protection interrupts the closed linkage. A short reversal followed by a forward cycle unblocks the screen.
Furthermore, defined meshing of the cleaning rakes with the bar rack ensures a high operating reliability.
|
|
|
|
HUBER - WHERE QUALITY AND SERVICE SPRING TO MIND
Huber Technology UK, Units C and D Brunel Park
Bumpers Farm, Chippenham Wiltshire SN14 6NQ
Phone +44 1249 765000, Fax +44 1249 449076, E-mail: rotamat@huber.co.uk |
|
|
|
