 |
|
|
ROTAMAT® Longitudinal Grit Trap Ro 6 |
|
|
Longitudinal grit trap with grit removal screw
- Designed accordance with international standards
- Available with or without aeration
- Optional separate grease chamber with automatic grease removal
- Manufactured entirely in stainless steel
|
|
|
The grit trap design and dimensioning are fully compliant with international standards. The Ro 6 is available as an aerated or unaerated unit. The decision on when to use the aerated or unaerated option is for example the specific ratio between the storm and dry weather flow and if any further grit treatment facilities are installed or planned.
The horizontal grit conveyor transports the separated grit particles to the inclined grit removal screw installed within the grit trap. The inclined screw dewaters and discharges the compacted material into a container or a subsequent optional RoSF4/t Grit Washer.
When using an aerated grit channel, separation of fats and grease is available. The grease is collected in a separate chamber with the partition between the grit trap chamber and grease chamber consisting of a slotted scum board. The flow generated within the grit trap chamber by the aeration system transports the grease through the slotted scum board into the grease chamber. The grease
removal paddle further ensures complete grease removal over the full grit trap length preventing a digestion process that would normally be associated with improper grease removal.
|
|
|
|
HUBER - WHERE QUALITY AND SERVICE SPRING TO MIND
Huber Technology UK, Units C and D Brunel Park
Bumpers Farm, Chippenham Wiltshire SN14 6NQ
Phone +44 1249 765000, Fax +44 1249 449076, E-mail: rotamat@huber.co.uk |
|
|
|
